Elation DMX-512 Bedienungsanleitung PDF herunterladen (Seite 8)

Case 1: Remove a receiver:

a) Press and hold the configuration button on receiver for 3~ 10 seconds;

b) The LED on the receiver will turn to Solid red; the receiver can log out

from the transmitter (T1);

c) press the configuration button on transmitter(T2) for less than 3 second,

then the fixture will start to connect with the transmitter(T2)

Case 2: Remove all receivers from a transmitter (T1) to log in to T2;

a) Press and hold the configuration button on the T1 as least 5 seconds,

can clear the connection with all the fixtures.

b) All the red/green LEDs on the receiver fixtures will turn to Solid red to

indicate that the receivers are unassigned and removed from the

transmitter ( T1);

c) Press and hold the configuration button on the T2 less then 3 second ,

the fixtures will connect with the T2

PS: 1. Please log the receivers out from the transmitter after every job, so that

the receivers are in free un assigned state and ready to be assigned to a

transmitter in next job.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and

moistened cloth. Never use alcohol or solvents!

There are no servicable parts inside the device. Maintenance and service

operations are only to be carried out by authorized dealers.

Should you need any spare parts, please use genuine parts.

Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply : DC6~12V

Power consumption : max. 0.5W

Packing dimensions :21 x 10.5 x 29 cm

Net weight : 0.7 KGS;

Gross weight: 1.1 KGS;

Remark: errors and omissions for every information given in this manual

excepted. All information is subject to change without prior notice.

- 8 -

1 2 3 4 5 6 7 8

Keine Kommentare

Elation DMX-512 Bedienungsanleitung Seite 8