To delete a chase
Enter the Programing mode.
(1)
Select a chase to be deleted.
(2)
Press and hold down the DEL button, and at the same time, tap your selected chase
button, all LEDs will flash briefly, that means the chase has been deleted.
(3)
To delete all the chases
Before turning on the power, you press and hold down the DEL button and the Bank
Down button, and then turn on the power at the same time, all LEDs flash briefly, this
just means all the chases have been deleted.
Operation Guide
8
Set a scene(step), and then tap the Rec button, the display will show you the follw-
ing step.
(5)
You tap the Tap/disp button, and then tap the Rec button again, all LEDs flash briefly,
this means your operation has been saved.
(6)
You can add more scenes(steps) into a chase in the same way as the above.
To delete a scene (step) from a chase
Enter the Programing mode.
(1)
Select a chase to be edited.
(2)
Tap the Tap/disp button, the Step LED appears and the display window shows you
the current step.
(3)
Tap the Up/Down button to select the step to be deleted.
(4)
Tap the DEL button to delete this step, all LEDs flash briefly, and the display will
show you the ahead step.
(5)
Chase Playback
When powered on, this unit will be firstly in the Manual control mode, and all channel
outputs are in black-out state (the Blackout LED flashes at the display window).
(1)
Tap the Blackout button (Blackout LED goes out) to enable the channel output.
(2)
1. Manual trigger:
Tap your selected Chase button, its LED will be lit. Then use the Fade Time fader to
adjust the running state.
(3)
Tap the Up/Down button to run the chase step by step.
(4)
Operation Guide
7
Tap the Music/Bkc button, the Audio Trigger LED will light up at the display window,
this indicates you that you are now in the Audio trigger mode.
(1)
Tap Bank Up/Down button to select desired bank (the scenes in the bank will run
sensitively by the Audio signal through the built-in microphone).
(2)
3. Audio trigger:
Tap the Audio button again(Audio Trigger LED goes out) to exit from the Audio mode.
(3)
Chase Operation
This product has 12 programmable chases, each chase can record up to 240 scenes/
steps. Please see the below instructions for Chase setting.
To record a chase
Enter the Programing mode.
(1)
Press a Chase button, its LED will be lit.
(2)
Select a scene which you want to record into the chase as the first step.
(3)
Press the REC button, all LEDs will flash briefly, that means your operation has
been saved.
(4)
Record more scenes into the chase as your desire till finish your settings. Up to
240 scenes (steps) can be recorded in a chase.
(5)
To record a bank of scenes into a chase
Enter the Programing mode.
(1)
Select a Chase to be edited.
(2)
Select a bank which you want to record into the chase.
(3)
Tap the Music/Bkc button, and then tap the Midi/Rec button, all LEDs will flash briefly,
that means the selected bank has been recorded into this chase.
(4)
To add a step into a chase
Enter the Programing mode.
(1)
Select a Chase to be edited.
(2)
Tap the Tap/disp button, the Step LED appears and the display window shows you the
current step.
(3)
Tap the Up/Down button to select the step behind which you want to add a step.
(4)
(51 Seiten)
(31 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern